N95 mask photo

Safety: Mycotoxin (Vomitoxin) and respiratory health

Mycotoxins in corn are produced when certain molds infect the ears of corn. Molds produce mycotoxins only under certain environmental conditions. Furthermore, not all molds cause mycotoxins, but mycotoxins in corn cannot exist unless molds are present. In fact, thousands of molds are capable of growing on corn, but only a very few species actually produce mycotoxins – and only under certain Read more

Thanksgiving background photo

Thanksgiving Safety Tips

Many people travel by car for Thanksgiving.

Keep in mind the following safety tips over the holiday:

  • Check your emergency kit: Contents should include: battery powered radio, flashlight, blanket, jumper cables, fire extinguisher, first aid kit, bottled water, non-perishable foods, maps, tire repair kit and flares.
  • Be aware of changes in weather. Remember weather can change dramatically from when you start your trip to when you end.
  • Long weekends have 18 per cent more deadly accidents than non-holiday weekends.
  • Extra police force will be on the roadways this weekend to monitor aggressive, speeding, distracted and impaired drivers.
  • Failing to use your seatbelt may be a bigger cause of fatal accidents during long weekends than either driver intoxication or speeding
  • Children under 12 should always ride in the back seat.

 In addition to road safety, please consider the following:

  • Cooking mishaps account for 30 per cent of residential fires in Canada, according to data from the National Fire Information Database.
  • Don’t leave your stove or oven unattended and make sure you have working smoke alarms and a fire extinguisher.
  • If you have a grease fire in one of your pots, turn off the source of the heat and focus on cutting the oxygen supply. You can do so by covering up your pot with a tight-fitting lid, if you have one, or another pot.
  • NEVER use water to try to put it out a grease fire! This can cause the grease to sputter and for the fire to spread. 

Keep safe everyone, and enjoy this celebratory time of year.

If you ate today, thank a farmer.

True Armyworm larvae photo

Watch for Armyworm in spring cereals and mixed forages

By Tracey Baute

Armyworm has been spotted at low levels in a few winter wheat fields, though being so close to harvest, it is really not a concern in that crop. However, it does indicate a need to keep an eye out for them in spring cereals, as well as mixed forages (as they like to feed on grasses). True armyworm larvae can vary in colour from green to reddish-brown but all have white-bordered stripes running laterally along the body. True armyworm also have dark diagonal bands at the top of each abdominal proleg and a yellowish-brown head with a network of dark-brown lines creating a mottled pattern.

True Armyworm larvae photo

True Armyworm larvae. Photo by T. Baute, OMAFRA.

Scouting Guidelines: Scout every 4 days to stay ahead of any potential invasions. The best time to scout for true armyworm is shortly after dusk when larvae are actively feeding.  In cereals and mixed forages, examine 10 areas of the field, assessing the number of larvae per 30 cm x 30 cm (1 ft2). Pay particular attention to the border area directly adjacent to other grassy host crops. During the day, if it is cloudy and overcast, you might be lucky enough to see larvae on the head of the plant but on sunny days, they will be down on the ground among the crop debris or under soil clods. Brown frass may also be present on the plants and on the soil surface. Birds diving into your field is a good indication that there are good eats there so take a look.

True-Armyworm-parasitized-by-tachinid-fly-J-Smith-UGRC-pointing-to-egg_01

True Armyworm parasitized by Tachinid fly. Photo by J Smith UGRC pointing to egg.

When you do find larvae,  look for any white eggs that may be attached to the backs of the armyworm larvae. This is a sign that the larvae have been parasitized by one of its parasites which have done the job for you. Avoid treating with insecticides when large numbers of parasitized larvae are present as they have already been controlled by parasitoids or when larvae are close to 2.5 cm in length, as insecticides will no longer be effective and the larvae will soon stop feeding.

Threshold for Mixed Forages: Control is warranted when five or more larvae (smaller than 2.5 cm) per square foot are found. In seedling crops, two to three larvae (smaller than 2.5 cm) per square foot may warrant control.

Threshold for Cereals: Chemical control is warranted if there are 4 to 5 un-parasitized larvae per 30 cm x 30 cm and the larvae are smaller than 2.5 cm. If a significant amount of wheat head clipping is occurring, spray may be warranted if larvae are still actively feeding, are smaller than 2.5 cm and as long as pre-harvest intervals have not been reached.


Source: Field Crop News

forklift safety

Lifting and rigging safety

Lifting and rigging work is considered a high hazard task.

Protect yourself, your coworkers and the people around you while performing any hazardous type of work–on the job or at home.

There are a lot of associated hazards that accompany lifting any loads with cranes or equipment. It is important to not only understand proper rigging techniques, but also the other hazards that accompany this type of work task.

Lifting and rigging incidents

The first type of incident regarding lifting and rigging is some type of breakage of a sling, wire rope, or chain resulting in a dropped load. While these type of incidents usually have the most severe consequences, there are often many other types of less severe incidents that cause the majority of injuries or property damage.

Some of the other injuries and incidents that occur are sprains, falls, crush injuries, electrocutions, and struck-by incidents.

Hazards such as swinging loads, manual handling of heavy rigging, holding on to tag lines, moving equipment, pinch points, working on elevated surfaces, trip hazards, slippery surfaces, etc. can all be present during lifting operations.

Safe work practices

  • Anyone in a work area where a lift is being performed should be properly trained on the work scope, hazards, and mitigations of the task.
  • Inspect all rigging prior to using it for a lift.
  • All rigging should be properly stored after lifting operations are complete. Proper storage helps prevent the rigging from being damaged.

Summary

Proper planning and forethought is important to eliminate hazards and avoid incidents.

Be aware of the hazards that affect you and your coworkers on each unique lift that is completed.


The safety of our employees, customers, contractors, suppliers, visitors and the community is of the utmost importance to us.

Work safe. Farm safe. Home safe.™

 


Hensall staff and local students plant a rain garden

Hensall Rain Garden at Thompsons Limited

Bean Leaf Beetle

Bean Leaf Beetles Showing up in Essex and Chatham Kent

Bean leaf beetles (BLB) are showing up in early planted soybeans that were treated with only fungicide seed treatment. As the result of area wide use of insecticide seed treatments, this pest had much of a presence over the last decade. Thankfully, rescue treatments are still possible if threshold has been reached. Read more

Fusarium Head Blight

Fusarium head blight

What is it? Fusarium Head Blight is a fungal disease that affects the head of small grain crops. Also referred to as Scab, it can affect wheat, barley, oats, rye, corn, and triticale. Wheat and barley are generally the most affected. It is mainly caused by the species Fusarium graminearum, and can cause loss of […]