working in winter conditions photo

Safety: Preparing for winter work

/in , , , /by

Working outside in the winter can be a dirty job, but many of us have to do it.

Are you ready for winter work?

Here are some reminders about dressing for the weather and staying strong, healthy and safe: 

  • Two big concerns of working or simply spending time outdoors in cold weather are frostbite and hypothermia. Hypothermia is a potentially fatal condition caused by loss of body temperature, even in winter conditions people might not consider particularly nasty. Symptoms include fatigue, nausea, confusion, light-headedness and profuse sweating.
  • Wear the right gloves for the work you are doing. Gloves should have enough insulation to keep you warm and prevent frostbite, but be thin enough so you can feel what you are doing if you are manipulating controls or tools. Gloves which are too thick can also make your hands and wrists work too hard trying to hold on to objects, causing repetitive strain injury.
  • Dress in layers of light-weight clothing which keep you warmer than a single layer of heavy clothes. Remove layers as necessary to prevent overheating and perspiring which can lead to chills or hypothermia later. Protect your ears from frostbite as well by wearing a hat that will cover your ears, or use ear muffs.
  • Keep your safety eyewear from fogging up in the cold. Investigate anti-fog coatings and wipes to see if these products are appropriate for your eyewear.
  • Your shoes or boots should have adequate tread to prevent slips and falls on wet or icy surfaces. Slow down when walking across slippery surfaces and be especially careful on ladders, platforms and stairways.
  • Get plenty of rest. Working in the cold and even traveling to and from work in the winter takes lots of energy. Cold weather can strain your heart, even if you aren’t overexerting yourself, so be sure to pace yourself when lifting heavy objects or shovelling snow.

Work safe. Farm safe. Home safe.™

Safety photo driving in fog

Safety: Driving tips for late fall and early winter

/in , /by

The late fall or early winter season brings an increase in seasonal dangers that you should be aware of. Road and driving conditions change with the onset of time changes and late fall and early winter weather changes. Read more

Safety: Hazards of fall driving

/in , , , /by

Weather conditions can be unpredictable in the fall. A bright, beautiful afternoon can turn rainy and cold in minutes. With the days getting shorter, you could find yourself commuting to and from work in darkness.

Common fall driving hazards

Back to school traffic

Fall means back to school traffic for kids, which means more cars and buses on the roads. Drivers need to watch out for increased pedestrian traffic in the morning and afternoon as children walk to and from school and their neighborhood bus stops.

Rain

Rain can be particularly dangerous, as water pools on top of dust and oil that hasn’t had a chance to wash away and makes the pavement extremely slippery.

Fog

Cold fall mornings often lead to fog, which can greatly limit your driving visibility and perception of distance. Fog tends to occur in low places or areas surrounded by hills, water, mountains, and trees. One common mistake drivers make during foggy conditions is putting on their high beams instead of staying with their low beams. When driving through fog, slow down and stay well behind the vehicle in front of you so you’ll have adequate time to stop if required.

Frost

During the fall, temperatures tend to drop dramatically during the night, which can lead to morning frost and icy spots on the road. This is especially common on bridges, overpasses, and shaded areas of the road.

Sun glare

Fall is a bad time for sun glare on the roads. Sun glare can impact your sight for seconds after exposure, making it hard to see pedestrians, oncoming traffic, or the vehicle in front of you.

Deer crossing sign

Safety: Avoiding deer collisions

/in , , /by

The fall season brings an increase in deer activity because it’s their time for mating and migrating. Avoid deer collisions by watching for darting deer, especially when driving early in the morning or at night. According to the insurance institute, 1.6 million deer-vehicle collisions occur each year, resulting in 200 fatalities, tens of thousands of injuries and over $3.6 billion in vehicle damage. Read more

N95 mask photo

Safety: Mycotoxin (Vomitoxin) and respiratory health

/in , , /by

Mycotoxins in corn are produced when certain molds infect the ears of corn. Molds produce mycotoxins only under certain environmental conditions. Furthermore, not all molds cause mycotoxins, but mycotoxins in corn cannot exist unless molds are present. In fact, thousands of molds are capable of growing on corn, but only a very few species actually produce mycotoxins – and only under certain Read more

Safety PPE gear

Safety: Power tool safety

/in /by

A power tool is a tool that is actuated by an additional power source and mechanism other than the solely manual labor used with hand tools.

The most common types of power tools use electric motors, pneumatics, or hydraulics.

To prevent injuries, incidents, and damage to power tools, always take the following precautions:

  • Never carry a power tool by the cord.
  • Never disconnect a power tool by yanking the cord to remove the plug from the receptacle.
  • Keep tool cords away from sources of excessive heat and sharp edges.
  • Disconnect tools when not using them, prior to servicing and cleaning, and when changing accessories such as blades and bits.
  • Keep people not involved in the work at a safe distance.
  • Secure work with clamps or a vise. This allows you to operate the tool with two hands.
  • Do not hold fingers on the power button while carrying a tool that is plugged in.
  • Follow the instructions provided in the user manual.
  • Keep good footing, and maintain good balance.
  • Wear proper apparel for the required task. Avoid wearing loose clothing or jewelry that can become caught in moving parts.
  • Wear proper personal protective equipment such as gloves, face, and eye protection.

Always inspect power tools prior to use. If a tool is not in safe operating condition, remove the tool from service, and affix a “Do Not Use” tag.

Work safe. Farm safe. Home safe.™

Safety tie down on pickup truck

Safe loading of pickup trucks

/in /by

Make sure you have the right equipment

Most pickup trucks will have tie down points already installed. For more added security, it is often a good idea to purchase some additional equipment. For loose items, you may want to add a toolbox or Tonneau cover

You will also want to make sure that you have some good quality ratchet straps, bungee cords or tarps depending on what you are carrying.

Know how much load your truck can carry

Especially if you are transporting heavy items, you need to know your vehicle’s gross vehicle weight rating as well as your load capacity. You should be able to find this information on a label inside your driver’s door or in your owner’s manual. Under no circumstances should you exceed this limit because doing so could damage your vehicle.

Put heavier items toward the front

When loading your pickup truck, always try to put heavier items toward the cab to prevent your vehicle from becoming back-weighted and affecting your power steering. You should also try to distribute the weight fairly evenly from side to side.

Secure items on at least two sides

Once you’ve following all of the tips listed above, it is important that your items are tied down on at least two sides. This will help keep items from moving around and potentially coming loose. Items that bounce around inside your truck can cause damage or become damaged themselves, and if they end up falling out of your truck, they may cause a serious accident.

Flag long loads

If you are transporting longer items that extend beyond the length of your truck bed, you are required by law to attach a red flag or cloth to the end of the load. If you do not have something at home that you can attach to the load, you may purchase a tailgate flag at your local home improvement centre.

When loading loose items such as firewood, scrap metal or any other item into the back of a pickup truck, use caution. Throwing items with great force can cause ricochet (bounce back) that could injury you or damage the vehicle. A Thompson employee suffered a facial laceration from steel that bounced back.

Thanksgiving background photo

Thanksgiving Safety Tips

/in , , /by

Many people travel by car for Thanksgiving.

Keep in mind the following safety tips over the holiday:

  • Check your emergency kit: Contents should include: battery powered radio, flashlight, blanket, jumper cables, fire extinguisher, first aid kit, bottled water, non-perishable foods, maps, tire repair kit and flares.
  • Be aware of changes in weather. Remember weather can change dramatically from when you start your trip to when you end.
  • Long weekends have 18 per cent more deadly accidents than non-holiday weekends.
  • Extra police force will be on the roadways this weekend to monitor aggressive, speeding, distracted and impaired drivers.
  • Failing to use your seatbelt may be a bigger cause of fatal accidents during long weekends than either driver intoxication or speeding
  • Children under 12 should always ride in the back seat.

 In addition to road safety, please consider the following:

  • Cooking mishaps account for 30 per cent of residential fires in Canada, according to data from the National Fire Information Database.
  • Don’t leave your stove or oven unattended and make sure you have working smoke alarms and a fire extinguisher.
  • If you have a grease fire in one of your pots, turn off the source of the heat and focus on cutting the oxygen supply. You can do so by covering up your pot with a tight-fitting lid, if you have one, or another pot.
  • NEVER use water to try to put it out a grease fire! This can cause the grease to sputter and for the fire to spread. 

Keep safe everyone, and enjoy this celebratory time of year.

If you ate today, thank a farmer.

Oxy-Acetalyne Tanks

Safety: Compressed Gas Cylinder Storage

/in /by

Compressed gas cylinders pose significant hazards.

 Consider the following safe practices:

  • Store cylinders in a clearly identified, dry, well-ventilated storage area that is not exposed to heat and away from doorways, aisles, stairs, etc.
  • Post “No-Smoking” signs in the storage area
  • Store cylinders, both empty and full, in the upright position. Secure cylinders with a chain or properly rated belt
  • Ensure that the valves are closed tightly with the protective caps in place
  • If storing cylinders outside, place them on a fireproof surface and enclose a tamper-proof secured enclosure
  • Protect cylinders from contact with ice, snow, water, salt, corrosion, and high temperatures
  • Use a chain or adequate support system to protect cylinders from falling. Consider securing each cylinder separately to prevent other cylinders from falling when items are removed from storage.
  • Separate oxygen cylinders from fuel gas cylinders or combustible materials.

In addition, always avoid the following activities:

  • Avoid fastening cylinders to a work table or to structures where they could become part of an electrical circuit
  • Do not store cylinders in enclosures such as lockers or cabinets
  • Do not tamper or alter safety devices
  • Avoid placing cylinders in a horizontal position
  • Do not accept compressed gas cylinders from the supplier unless they are properly labeled and contain protective valve caps
  • Avoid dragging, sliding, or dropping cylinders. They can be rolled for short distances on their base. Use of cylinder trolley or cart is preferred. Always secure the cylinder to the cart or trolley.